Trang chủ » Các loại thiết bị dệt may

Soft Winder Machine for Spinning Line (GA014SF)

Spinning Machinery

HS Code:8445409000

ISO

Basic Info.


HS Code:8445409000

Additional Info.

GA014SF Soft winding can winding pure cotton yarn, chemical-fiber and blended yarns on cones, it's for preparing before yarn dyeing using.

Main technical data:

*Type: Double sides(Groove Drum)

*Number of spindles: 40, 60, 80, 100, 120 (100 as the standard spindle number)

*Spindle Gauge: 254mm

*Guide Traverse: 152mm

*Winding speed: 350-400 meters/minute

*Grooved drum: Bakelite grooved drum of φ 80mm with 2 circles of the same distance.

*Drum guide travel: 147mm

*Grooved Drum transverse: 2.2mm, 3.2mm, two types.

*Traversing times of grooved drum: 14.2 times/minute.

*Bobbin: 0° , 3° 30', 4° 20'or can be make-to-order against offered sample bobbin.

*Take up size: Φ180 (big Dia) × 149mm (length)

*Density of cheese yarn on cones: 0.30-0.40g/cm3

*Yarn-break auto-stop device: Each spindle has an independent set of auto-stop device.

*Tension device: Tension balancing device is set with total 10 kinds of tension spacers (weight balancing can be carried out according to technical requirements).

*Yarn cleaning device: Installed Blade for Yarn cleaning.

*Diameter of Drum's belt pulley: Φ110mm

*Blank-bobbin conveyer device: It is equipped at the left and right side of the machine, and it's used to convey blank bobbins from the head to the rear.

*Hold yarn shelf: Can use Cylinder bobbin, Conical Cone and etc.

*Anti-Ribboning device: It has a intermittent switch in the Electronic box to make the motor rotating turning on and off circularly.

*Traversing gear: It installed grooved-drum traversing gear to remove the hard edges of the cone.

*Waste yarn Cleaning device: It can optional to install GUO13A type to-and-fro blowing cleanser on the machine.

*Machine size: L13795 x W1122 x H1615mm (it's 100 spindles size ).

*Motor Specification: Main Motor, JF0-32A-4, 1.8Kw, 380V, and 1440 RPM, 2 sets.

Auxiliary Motor, FW11A-6, 0.37Kw, 380V, and 960 RPM, 1 set.

*Triangle belt: A1800, 6 pieces

The machine can optional install Electric Cleaner, Length counting device per spindle, time counting device, Frequency Inverter Controller, Air Splicer and etc.

C th? b?n quan tm

Product Description

GA014SF Soft winding can winding pure cotton yarn, chemical-fiber and blended yarns on cones, it's for preparing before yarn dyeing using.

Main technical data:

*Type: Double sides(Groove Drum)

*Number of spindles: 40, 60, 80, 100, 120 (100 as the standard spindle number)

*Spindle Gauge: 254mm

*Guide Traverse: 152mm

*Winding speed: 350-400 meters/minute

*Grooved drum: Bakelite grooved drum of φ 80mm with 2 circles of the same distance.

*Drum guide travel: 147mm

*Grooved Drum transverse: 2.2mm, 3.2mm, two types.

*Traversing times of grooved drum: 14.2 times/minute.

*Bobbin: 0° , 3° 30', 4° 20'or can be make-to-order against offered sample bobbin.

*Take up size: Φ180 (big Dia) × 149mm (length)

*Density of cheese yarn on cones: 0.30-0.40g/cm3

*Yarn-break auto-stop device: Each spindle has an independent set of auto-stop device.

*Tension device: Tension balancing device is set with total 10 kinds of tension spacers (weight balancing can be carried out according to technical requirements).

*Yarn cleaning device: Installed Blade for Yarn cleaning.

*Diameter of Drum's belt pulley: Φ110mm

*Blank-bobbin conveyer device: It is equipped at the left and right side of the machine, and it's used to convey blank bobbins from the head to the rear.

*Hold yarn shelf: Can use Cylinder bobbin, Conical Cone and etc.

*Anti-Ribboning device: It has a intermittent switch in the Electronic box to make the motor rotating turning on and off circularly.

*Traversing gear: It installed grooved-drum traversing gear to remove the hard edges of the cone.

*Waste yarn Cleaning device: It can optional to install GUO13A type to-and-fro blowing cleanser on the machine.

*Machine size: L13795 x W1122 x H1615mm (it's 100 spindles size ).

*Motor Specification: Main Motor, JF0-32A-4, 1.8Kw, 380V, and 1440 RPM, 2 sets.

Auxiliary Motor, FW11A-6, 0.37Kw, 380V, and 960 RPM, 1 set.

*Triangle belt: A1800, 6 pieces

The machine can optional install Electric Cleaner, Length counting device per spindle, time counting device, Frequency Inverter Controller, Air Splicer and etc.

Sản phẩm cùng loại :