Basic Info.
Standard:CE
Additional Info.
PL-B1 Fabric Inspection and Winding Machine
Usage: This unit is specially designed for inspecting and rolling up all kinds of knitted, printed, cotton, tricot, and woven fabrics etc.
Characteristics:
1. Special designed lopping inspecting board which is near to operator makes it easier to mend or label fabrics.
2. Fabric tension is adjustable via two inverters.
3. Equipped with spiral spreading roller to eliminate curled edge and avoid shrink of fabric width. Expanding power 1/2HP
4. Working speed is managed by inverters and easy to control by the button on control panel.
5. Digital counter could make accurate measurement of length in yards or meters which can be interchanged.
6. Winding roller and feeding roller are driven by gear motors.
7. Auto edge-alignment system consists of edge sensor and hydraulic station made in Taiwan is adopted. Power 1/2HP.
8. High speed reaches 80m/min.
9. Inspecting board is made of milky color acrylic.
Technical parameters:
1. Fabric Width: 2000mm~3600mm.
2. Diameter of Fabric Rolls: < 600mm.
3. Highest Speed: 80m/min.
4. Power of Main Motor: 1HP× 2.
5. Aligning Tolerance: ± 3mm.
6. Dimensions: 2150mm(L) × 2300mm(W)× 2500mm(H).
Product Description
PL-B1 Fabric Inspection and Winding Machine
Usage: This unit is specially designed for inspecting and rolling up all kinds of knitted, printed, cotton, tricot, and woven fabrics etc.
Characteristics:
1. Special designed lopping inspecting board which is near to operator makes it easier to mend or label fabrics.
2. Fabric tension is adjustable via two inverters.
3. Equipped with spiral spreading roller to eliminate curled edge and avoid shrink of fabric width. Expanding power 1/2HP
4. Working speed is managed by inverters and easy to control by the button on control panel.
5. Digital counter could make accurate measurement of length in yards or meters which can be interchanged.
6. Winding roller and feeding roller are driven by gear motors.
7. Auto edge-alignment system consists of edge sensor and hydraulic station made in Taiwan is adopted. Power 1/2HP.
8. High speed reaches 80m/min.
9. Inspecting board is made of milky color acrylic.
Technical parameters:
1. Fabric Width: 2000mm~3600mm.
2. Diameter of Fabric Rolls: < 600mm.
3. Highest Speed: 80m/min.
4. Power of Main Motor: 1HP× 2.
5. Aligning Tolerance: ± 3mm.
6. Dimensions: 2150mm(L) × 2300mm(W)× 2500mm(H).