Basic Info.

Additional Info.

The electrical main element uses import part, PLC control and the independent transmission adopts Japan SANYO servo moto

1. Function:
It's suitable for the printing of natural fiber, chemical fiber, blending woven and knit fabric.
2. Operation Flow:
Fabric Feeding in open-widthPrintingDryingFabric Dropping

3. Technical Specification:
(1)No. Of Color: 246810121416
(2)Registering Precision: The error between each printing position is less than 0.1mm, total registering error is less than 0.2mm
(3)Scope of Registering Adjustment: The longitudinal registering is unrestricted, the scope of transverse registering is ± 10mm, the declinate registering is ± 3mm
(4)Drying Method: Multilayer Hot-air drying
(5)Heated by: Steam(0.2-0.4MPa) Heat-conduction oil
(6)No. Of Drying Chamber: 2, 3, 4 (cordwood system type)
(7)Max. Steaming Capacity of Each Drying Chamber: 230-270kg/h (water)
(8)The Working Temprature of Drying Chamber: 120 (steam) 150(heat-conduction oil)
(9)Total Power: Standard 110KW

4. Basic Structure:
The machine is driven by three phase AC inverter motor. The main components are as follow:
(1) Fabric Feeding Unit (including):
-Machine frame;
-Dust absorption device;
-Transmission roller;
-Fabric tightening device
-Rolling feeding device;
-Brush box and fabric edge control device.

(2)Printing Unit (sectional design):
-Adopt the most advanced independent transmission(driven) system;
-Automatic fabric edge-control system;
-Scraping system;
-Slurry supplying system;
-Washing system,
-Air passage and control system;
-Gluing system of water dissolution glue and heat shaping glue,
-Fabric and conveyor belt heating system
-Conveyor belt rectification system.

(3)Drying Unit:
-Multi-layer structure for fabric passing throgh;
-Heated by: Steam(0.2-0.4MPa), heat transfer oil(1.675 x 109j/h each section)
-Section No. Of drying chamber: 2, 3, 4 (optional),
-Capacity of each section: 9m (fabric)

(4)Fabric Dropping Device: By

Product Description

The electrical main element uses import part, PLC control and the independent transmission adopts Japan SANYO servo moto

1. Function:
It's suitable for the printing of natural fiber, chemical fiber, blending woven and knit fabric.
2. Operation Flow:
Fabric Feeding in open-widthPrintingDryingFabric Dropping

3. Technical Specification:
(1)No. Of Color: 246810121416
(2)Registering Precision: The error between each printing position is less than 0.1mm, total registering error is less than 0.2mm
(3)Scope of Registering Adjustment: The longitudinal registering is unrestricted, the scope of transverse registering is ± 10mm, the declinate registering is ± 3mm
(4)Drying Method: Multilayer Hot-air drying
(5)Heated by: Steam(0.2-0.4MPa) Heat-conduction oil
(6)No. Of Drying Chamber: 2, 3, 4 (cordwood system type)
(7)Max. Steaming Capacity of Each Drying Chamber: 230-270kg/h (water)
(8)The Working Temprature of Drying Chamber: 120 (steam) 150(heat-conduction oil)
(9)Total Power: Standard 110KW

4. Basic Structure:
The machine is driven by three phase AC inverter motor. The main components are as follow:
(1) Fabric Feeding Unit (including):
-Machine frame;
-Dust absorption device;
-Transmission roller;
-Fabric tightening device
-Rolling feeding device;
-Brush box and fabric edge control device.

(2)Printing Unit (sectional design):
-Adopt the most advanced independent transmission(driven) system;
-Automatic fabric edge-control system;
-Scraping system;
-Slurry supplying system;
-Washing system,
-Air passage and control system;
-Gluing system of water dissolution glue and heat shaping glue,
-Fabric and conveyor belt heating system
-Conveyor belt rectification system.

(3)Drying Unit:
-Multi-layer structure for fabric passing throgh;
-Heated by: Steam(0.2-0.4MPa), heat transfer oil(1.675 x 109j/h each section)
-Section No. Of drying chamber: 2, 3, 4 (optional),
-Capacity of each section: 9m (fabric)

(4)Fabric Dropping Device: By