Basic Info.

Additional Info.

1Gauge
5G, 7G, 10G, 12G, 14G
2knitting width
52"(132cm)
3carriage
Single carriage, single systems.
4needle bed
Single needle and single flake assembled needdle bed, needles and flakes can be replaced when mangling.

5yarn carriers
2× 6 sets of yarn carriers on 3 yarn carrier guied bars.
6main drive system
Driving with AC servo motor. Variable carriage strole according to knitting width.
7knitting speed
32 levels of speed, ma× 1.2m/sec. Knitting speed varies according to gauge and knitting conditions.

8stitch cam
32 steps of independent selections with slight adjustment on each section.
9racking
Racking is controlled by sevo-motor, max 2-inch racking.
10cam system
Cam system combined 3-way technique. 3 technique selections for knitting(knit, tuck, niss). Simultaneous transferring, front or back, independent of craaiage direction.
11needle selection
Full jacquard selection via 6 sections of special solenoid actuators.
12Take-down device
Main roller/Sub roller: 255 levels of speed, torque-motor control, programmable control.

13stop motion
Stop automatically with signal and sound alarm when yarn break, knot, prsee of, needle break, over current, orllback, wrong racking, improper singer, needle collision, excessive yarn, piece count, etc.
14Operation lamp
Green/normal operation; Yellow/normal stop; Red/abnormal stop.
15Sinker
Adjustable sinker at regular opening and elastic stale is controlled by a step motor.

16Packing dimension
Length× Width× Height 3M× 1.1M× 1.8M
17Weight
Net weight/ Gross weight 980/1120 kg
18data input
Input by flash disk and operate by key board
19Pattern memory
1024× 2048
20Memory capacity
100M

21Display screen
Big display screen of 10.4" is easy to operate
22Operation platform
Standard language is Chinese, paid language software is allowed(option setting).
23Main power
3 phases AC 200V, 50/60Hz, Electricity consumption 2.0KVA

Product Description

1\Gauge
5G, 7G, 10G, 12G, 14G
2\knitting width
52"(132cm)
3\carriage
Single carriage, single systems.
4\needle bed
Single needle and single flake assembled needdle bed, needles and flakes can be replaced when mangling.

5\yarn carriers
2× 6 sets of yarn carriers on 3 yarn carrier guied bars.
6\main drive system
Driving with AC servo motor. Variable carriage strole according to knitting width.
7\knitting speed
32 levels of speed, ma× 1.2m/sec. Knitting speed varies according to gauge and knitting conditions.

8\stitch cam
32 steps of independent selections with slight adjustment on each section.
9\racking
Racking is controlled by sevo-motor, max 2-inch racking.
10\cam system
Cam system combined 3-way technique. 3 technique selections for knitting(knit, tuck, niss). Simultaneous transferring, front or back, independent of craaiage direction.
11\needle selection
Full jacquard selection via 6 sections of special solenoid actuators.
12\Take-down device
Main roller/Sub roller: 255 levels of speed, torque-motor control, programmable control.

13\stop motion
Stop automatically with signal and sound alarm when yarn break, knot, prsee of, needle break, over current, orllback, wrong racking, improper singer, needle collision, excessive yarn, piece count, etc.
14\Operation lamp
Green/normal operation; Yellow/normal stop; Red/abnormal stop.
15\Sinker
Adjustable sinker at regular opening and elastic stale is controlled by a step motor.

16\Packing dimension
Length× Width× Height 3M× 1.1M× 1.8M
17\Weight
Net weight/ Gross weight 980/1120 kg
18\data input
Input by flash disk and operate by key board
19\Pattern memory
1024× 2048
20\Memory capacity
100M

21\Display screen
Big display screen of 10.4" is easy to operate
22\Operation platform
Standard language is Chinese, paid language software is allowed(option setting).
23\Main power
3 phases AC 200V, 50/60Hz, Electricity consumption 2.0KVA