Basic Info.

Additional Info.

1. The measured length weft is supplied to the loom by means of the system.

2. Low tension weft pre-wind.

3. Vibration winding drum, simply by changing the diameter of weft storage durm.

4. Simple S/Z rotationwise shifting function.

5. Yarn separation is contimuously adjustable. Maximum to 2.2 mm.

6. Photocell is used to control the number of coils to on the spoil body of the feeder and detect the breakage weft, it could send signal to stop the loom when weft breakage.

Applicable machine type: Airjet and waterjet looms.

Weft: Filament yarn, staple fibre.

Yarn count range: 6Nm--20dtex.

Weft feeding speed: With pattern<=2400m/min, without pattern<=1600m/min

S/Z Rotate direction: S/Z shiftable

Yarn storage control: Adjustable yarn separation from 0.7mm to 2.2mm

Weft breakage control loom stop function: Yes

Weft brake debice: Optional configuration

Product Description

1. The measured length weft is supplied to the loom by means of the system.

2. Low tension weft pre-wind.

3. Vibration winding drum, simply by changing the diameter of weft storage durm.

4. Simple S/Z rotationwise shifting function.

5. Yarn separation is contimuously adjustable. Maximum to 2.2 mm.

6. Photocell is used to control the number of coils to on the spoil body of the feeder and detect the breakage weft, it could send signal to stop the loom when weft breakage.

Applicable machine type: Airjet and waterjet looms.

Weft: Filament yarn, staple fibre.

Yarn count range: 6Nm--20dtex.

Weft feeding speed: With pattern<=2400m/min, without pattern<=1600m/min

S/Z Rotate direction: S/Z shiftable

Yarn storage control: Adjustable yarn separation from 0.7mm to 2.2mm

Weft breakage control loom stop function: Yes

Weft brake debice: Optional configuration