Basic Info.
Additional Info.
Technical specification88
Controller: Controlled by servo motor, which connected with BTSR's SMART64 yarn feeds, which prepare the CAN connector in advance, to imput of alarm for 26 keys.
Programming: By Cixing graphic system, the program can be modified directly on software of machine screen board.
Machine monitor: 10.4"colors screen(800x600) with language of Chinese and English interface.
Diameter: From 12" to17"
Gauge: From 16G to 32G
Feed: 8 feeds for any diameter
Machine speed: 13"machine max speed 100 RPM(depending on diameters, materials and knitting structures)
Weight: Approximate 750kgs
Selection actuator: 2x16 levels WAC/Japan actuators.
Yarn finger: Each feed has 7 yarn fingers(including 2 colors yarn finger at 2 positions).
Binders for bare covered elastic yarn: 8 feeds, each feed has 2 yarn binders
Yarn gripper and cutter: The dial rise or fall control by stepping motor and cutter's height adjustable.
Take down: Suction with independent or centralized fans system, the machine comes with a revolving tube to prevent twisting.
Stitch cam: By a stepping motor for each feed control the stitch density, allowing quick loosing or tightening on the same course.
Yarn sensor: 1 optical serial sensor per yarn finger, each feed has 8 optical sensors.
Creel stand: The creel stand behind of machine, set up yeans by pneumatic control.
Lubrication: Automatic and independent lubrication for needles, jacks and sinkers.
Multi-patterns: Knitted all seamless articles of garments with see-through pattern, mesh with net knitted in serts, pleats and tucks, embroidery-like motifs and placed all-over lace etc.
Waist belt: `Single or double with dial jacks in defferent selections and knitted-in, floated or laid in elastic yarn.
Terry kit: With terry kit it is possible to have terry insertions produced in any parts of seamless articles.
UPS device: The pattern programming memory protect by UPS battery during power stop suddenly and power switch off by software at same time.
Product Description
Technical specification88
Controller: Controlled by servo motor, which connected with BTSR's SMART64 yarn feeds, which prepare the CAN connector in advance, to imput of alarm for 26 keys.
Programming: By Cixing graphic system, the program can be modified directly on software of machine screen board.
Machine monitor: 10.4"colors screen(800x600) with language of Chinese and English interface.
Diameter: From 12" to17"
Gauge: From 16G to 32G
Feed: 8 feeds for any diameter
Machine speed: 13"machine max speed 100 RPM(depending on diameters, materials and knitting structures)
Weight: Approximate 750kgs
Selection actuator: 2x16 levels WAC/Japan actuators.
Yarn finger: Each feed has 7 yarn fingers(including 2 colors yarn finger at 2 positions).
Binders for bare covered elastic yarn: 8 feeds, each feed has 2 yarn binders
Yarn gripper and cutter: The dial rise or fall control by stepping motor and cutter's height adjustable.
Take down: Suction with independent or centralized fans system, the machine comes with a revolving tube to prevent twisting.
Stitch cam: By a stepping motor for each feed control the stitch density, allowing quick loosing or tightening on the same course.
Yarn sensor: 1 optical serial sensor per yarn finger, each feed has 8 optical sensors.
Creel stand: The creel stand behind of machine, set up yeans by pneumatic control.
Lubrication: Automatic and independent lubrication for needles, jacks and sinkers.
Multi-patterns: Knitted all seamless articles of garments with see-through pattern, mesh with net knitted in serts, pleats and tucks, embroidery-like motifs and placed all-over lace etc.
Waist belt: `Single or double with dial jacks in defferent selections and knitted-in, floated or laid in elastic yarn.
Terry kit: With terry kit it is possible to have terry insertions produced in any parts of seamless articles.
UPS device: The pattern programming memory protect by UPS battery during power stop suddenly and power switch off by software at same time.