Basic Info.
Standard:ISO9001
Additional Info.
Model GA728 Core Rapier Loom
This machine is mainly applicable to weave multi-layer true selvedge fabrics, especially to weave 4 layers grade 6-8 integral core for fire retardant conveyor used in the coal mine or at the wharf.
Main Structures and Technical Parameters
1Reed width: 1400mm, 1650mm.
2Beating-up: Crankshaft weft beating.
3Weft insertion: Double-rapier weft insertion.
4Overlocking: Independent hook needle overlocking mechanism.
5Weft feeding: Tension compensating mechanism.
6Let-off: Four rubber-covered rollers are tightly grasped with steel roller; Positive speed-adjusting continuous let-off.
7Shedding: Single dobby mechanism, conjugate cam positive driving, dobby shedding is controlled by pattern paper and peg, 16 heald frames.
8Take-up: Ratchet type pin-roller intermittent take-up.
9Warp supplying: Creel-type continuous warp supplying without yarn tail.
10Driving: The driving system consists of motor, band pulley and gear, etc. Main drive motor: 4KW, 960rpm (Model 140); 5.5KW, 960rpm (Model 165).
11Loom speed: 15-80rpm (frequency stepless regulating speed).
12The electric part has the fuction of starting, DOT motion, rapid stopping, etc.
13Overall dimension (not including creel) (length× Width× Height) (mm):
4500× 3860× 2400 ( Model 140); 4950× 4760× 2600 ( Model 165).
14Weight: About 5T.
Product Description
Model GA728 Core Rapier Loom
This machine is mainly applicable to weave multi-layer true selvedge fabrics, especially to weave 4 layers grade 6-8 integral core for fire retardant conveyor used in the coal mine or at the wharf.
Main Structures and Technical Parameters
1\Reed width: 1400mm, 1650mm.
2\Beating-up: Crankshaft weft beating.
3\Weft insertion: Double-rapier weft insertion.
4\Overlocking: Independent hook needle overlocking mechanism.
5\Weft feeding: Tension compensating mechanism.
6\Let-off: Four rubber-covered rollers are tightly grasped with steel roller; Positive speed-adjusting continuous let-off.
7\Shedding: Single dobby mechanism, conjugate cam positive driving, dobby shedding is controlled by pattern paper and peg, 16 heald frames.
8\Take-up: Ratchet type pin-roller intermittent take-up.
9\Warp supplying: Creel-type continuous warp supplying without yarn tail.
10\Driving: The driving system consists of motor, band pulley and gear, etc. Main drive motor: 4KW, 960rpm (Model 140); 5.5KW, 960rpm (Model 165).
11\Loom speed: 15-80rpm (frequency stepless regulating speed).
12\The electric part has the fuction of starting, DOT motion, rapid stopping, etc.
13\Overall dimension (not including creel) (length× Width× Height) (mm):
4500× 3860× 2400 ( Model 140); 4950× 4760× 2600 ( Model 165).
14\Weight: About 5T.