Basic Info.
Additional Info.
This machine combines sizing and warping in one machine, suitable for small orders, multi-yarn varieties, fine count high density weaving lines of cotton, yarn-dyed, blended fabrics, linen as well as industrial fabrics, especially for small yarn dyed orders.
It is applied for sizing by drawing the warps layer from creel to sizing trough. After drying, warps in sections are wound on loom beams in sheets.
| 1 | Working width: | 2300mm -3600mm |
| 2 | Beam dia.: | φ 800mm or φ 1000mm |
| 3 | Warping speed: | 10 - 80m /min |
| 4 | Beaming speed: | 0 - 100m /min |
| 5 | Beam tension accuracy: | ≤2% |
| 6 | Brake distance: | ≤ 2m |
| 7 | Beaming tension: | ≤6000N(when beam line speed ≤ 50m /min) |
| 8 | Drum dia.: | 1000mm |
| 9 | Drum tapering: | 1:8 for beam dia. 1150mm , 1:6 for beam dia .1380mm |
| 10 | Cone length: | 1:8 (standard) or 1:6( for option ) |
| 11 | Section traverse speed: | 0.001 -9.999 mm /r, stepless |
| 12 | Section positioning error: | ± 0.01mm |
| 13 | Distance reed between spacing reed and drum: | constant distance |
| 14 | Start point positioning: | automatically |
| 15 | Section positioning: | automatically |
| 16 | Section width: | 20 - 360mm or to order |
| 17 | Leasing reed positioning: | automatically |
| 18 | Max. sizing force: | 720N |
| 19 | Drying can temperature: | 0°C - 130°C |
| 20 | Drying form: | Entirely can drying (6 cans) |
| 21 | Steaming force: | ≤0.35MPa |
| 22 | Sizing trough cubage: | |
| 23 | Main trough: | 80L |
| 24 | Auxiliary trough: | 100L |
| 25 | Steaming capacity: | 300KgH2O/hr |
| 26 | Installed power: | 28Kw – 35Kw |
Product Description
This machine combines sizing and warping in one machine, suitable for small orders, multi-yarn varieties, fine count high density weaving lines of cotton, yarn-dyed, blended fabrics, linen as well as industrial fabrics, especially for small yarn dyed orders.
It is applied for sizing by drawing the warps layer from creel to sizing trough. After drying, warps in sections are wound on loom beams in sheets.
| 1 | Working width: | 2300mm -3600mm |
| 2 | Beam dia.: | φ 800mm or φ 1000mm |
| 3 | Warping speed: | 10 - 80m /min |
| 4 | Beaming speed: | 0 - 100m /min |
| 5 | Beam tension accuracy: | ≤2% |
| 6 | Brake distance: | ≤ 2m |
| 7 | Beaming tension: | ≤6000N(when beam line speed ≤ 50m /min) |
| 8 | Drum dia.: | 1000mm |
| 9 | Drum tapering: | 1:8 for beam dia. 1150mm , 1:6 for beam dia .1380mm |
| 10 | Cone length: | 1:8 (standard) or 1:6( for option ) |
| 11 | Section traverse speed: | 0.001 -9.999 mm /r, stepless |
| 12 | Section positioning error: | ± 0.01mm |
| 13 | Distance reed between spacing reed and drum: | constant distance |
| 14 | Start point positioning: | automatically |
| 15 | Section positioning: | automatically |
| 16 | Section width: | 20 - 360mm or to order |
| 17 | Leasing reed positioning: | automatically |
| 18 | Max. sizing force: | 720N |
| 19 | Drying can temperature: | 0°C - 130°C |
| 20 | Drying form: | Entirely can drying (6 cans) |
| 21 | Steaming force: | ≤0.35MPa |
| 22 | Sizing trough cubage: | |
| 23 | Main trough: | 80L |
| 24 | Auxiliary trough: | 100L |
| 25 | Steaming capacity: | 300KgH2O/hr |
| 26 | Installed power: | 28Kw – 35Kw |