Basic Info.
Additional Info.
Technical Specification
A. Spindle Motor: Servo Motor
B. Stepping Motor: Three phase, microstepping
C. Memory: 500, 000 stitches
D. Computer System: Dahao 09 series
E. Monitor Size: LCD
F. M axis Motor: Servo Motor
G. Power Supply: 220V/380v, 50/60 Hz
H. Embroidery Speed: 80-650/minute
I. Cylinder: Cushioned
J. H axis Motor: Servo motor Introduction
MJ-B
A. Type: DD- MJ-B Towel Embroidery Machine
B. Needle No.: 3-6
B. Head No.: 6-12
C. Head Interval: 400 mm
D. Embroidery Area: X420/Y750
E. Machine Size: 5980*1980*1850 (L*W*H) MJ-A
A. Type: DD- MJ-A Towel Embroidery Machine
B. Needle No.: 1
B. Head No.: 6-20
C. Head Interval: As required
D. Embroidery Area: As required PMJ-C
A. Type: DD- MJ-C Towel Embroidery Machine
B. Needle No.: 6-9+6
B. Head No.: 10
C. Head Interval: As 450
D. Embroidery Area: As required Function and Features
A. Strong computer compatibility: Tajima, Barudan, ZSK;
B. Huge design storage: 500, 000 stitches, 99 designs;
C. Thread break detection: Automatically detect breaks of top/under threads, stop itself automatically, and indicates the heads where thread breaks occur;
D. Sequin embroidery equipment: The elevating sequin equipments are flexible and reliable. The fixed plectrum equipments are accurate and firm;
E. Free design scaling: Separate or simultaneous scaling between 50% and 200% of the original design size in X or Y direction;
F. Free design rotation: 8 coordinate directions, and with entries between 0 and 89 degrees, cause the design to rotate in degrees within the range of 0-360 degrees.
G. Atomatic Trimming: Manual control of trimming operations. Automatic trimming at the end of embroideries, embroidery coclor changes and embroidery displacements;
H. Atomatic color change: Manual color changes, or automatic color changes at predefined color-changes sequence can be performed at the color-change positions;
I. Doweling: The last stitches shall be embroidered in chain stitches based on the setting for number of stitches for doweling;
J. Thread slack: The tension of the tension bases are adjusted under the control of thread slcack motor when switching between towel embroideries and chain stitches;
K. Height adjustment for head needle: Height of needle bar in each head can be controlled independently. The value for needle height can be adjusted between 0-9 when embroidering is stopped;
L. Lift: Manual or automatic lift is possible during embroidering or at the end of it. The machine can be stopped 27mm above the platform for changing clothing.
M. Returning to origin: The rotary hook will return to the origin when embroidery stops for ease of threading.
N. Processing thread ends: Thread ends on both sides shall be processed according to relevant requirements.
Product Description
Technical Specification
A. Spindle Motor: Servo Motor
B. Stepping Motor: Three phase, microstepping
C. Memory: 500, 000 stitches
D. Computer System: Dahao 09 series
E. Monitor Size: LCD
F. M axis Motor: Servo Motor
G. Power Supply: 220V/380v, 50/60 Hz
H. Embroidery Speed: 80-650/minute
I. Cylinder: Cushioned
J. H axis Motor: Servo motor Introduction
MJ-B
A. Type: DD- MJ-B Towel Embroidery Machine
B. Needle No.: 3-6
B. Head No.: 6-12
C. Head Interval: 400 mm
D. Embroidery Area: X420/Y750
E. Machine Size: 5980*1980*1850 (L*W*H) MJ-A
A. Type: DD- MJ-A Towel Embroidery Machine
B. Needle No.: 1
B. Head No.: 6-20
C. Head Interval: As required
D. Embroidery Area: As required PMJ-C
A. Type: DD- MJ-C Towel Embroidery Machine
B. Needle No.: 6-9+6
B. Head No.: 10
C. Head Interval: As 450
D. Embroidery Area: As required Function and Features
A. Strong computer compatibility: Tajima, Barudan, ZSK;
B. Huge design storage: 500, 000 stitches, 99 designs;
C. Thread break detection: Automatically detect breaks of top/under threads, stop itself automatically, and indicates the heads where thread breaks occur;
D. Sequin embroidery equipment: The elevating sequin equipments are flexible and reliable. The fixed plectrum equipments are accurate and firm;
E. Free design scaling: Separate or simultaneous scaling between 50% and 200% of the original design size in X or Y direction;
F. Free design rotation: 8 coordinate directions, and with entries between 0 and 89 degrees, cause the design to rotate in degrees within the range of 0-360 degrees.
G. Atomatic Trimming: Manual control of trimming operations. Automatic trimming at the end of embroideries, embroidery coclor changes and embroidery displacements;
H. Atomatic color change: Manual color changes, or automatic color changes at predefined color-changes sequence can be performed at the color-change positions;
I. Doweling: The last stitches shall be embroidered in chain stitches based on the setting for number of stitches for doweling;
J. Thread slack: The tension of the tension bases are adjusted under the control of thread slcack motor when switching between towel embroideries and chain stitches;
K. Height adjustment for head needle: Height of needle bar in each head can be controlled independently. The value for needle height can be adjusted between 0-9 when embroidering is stopped;
L. Lift: Manual or automatic lift is possible during embroidering or at the end of it. The machine can be stopped 27mm above the platform for changing clothing.
M. Returning to origin: The rotary hook will return to the origin when embroidery stops for ease of threading.
N. Processing thread ends: Thread ends on both sides shall be processed according to relevant requirements.