Basic Info.

Additional Info.

Ration filling machine for foam particle
1 Performance specification
1.1 This equipment is a small machinery with air blower of frequency conversion to quantitatively fill cloth products with plastic foam particles
1.2 Electric motor 1. 1KW, practical 0. 5KW. Single-phase voltage is 200-240 volts, 50-60 Hz.No matter the small shop, large factory, domestic or abroad, can install and use. Needn't to equip air compressor in addition, so can save electricity and energy, without noise, vibration and danger from the pressure container.
1.3 Each machinery only has one filling mouth. Filling speed is high, each pillow only takes 3-6 seconds. Controlled by pedal switch, shut down automatically when reach the setting weight.
1.4 Little seal size, filling pipe's diameter 32mm. According to user's request, the diameter of filling pipe can be 8-73mm so as to be suitable for different products form, for example, cotton flannel toy, cushion and pillow, etc.
1.5 Can also fill quantitively small particle products, such as silkworm sand and buckwheat, etc.
1.6 Can also fill inquantitively fluffy products such as eiderdown and chemical fibre, etc...The wind force can be set up at will. While filling bed clothes, select lower wind-force, thus the products are soft, the appearance is leveled, easy to fill, and low cost in electricity and energy; While filling pillow, select high wind force, thus the products are tight, difficult to stop up.
1.7 Researched and developed alone by ourselves, first-class level in world, China's patent protection.
1.8 Small size, light weight. Length*Width*High =0.5*0.5*1.0, weight 50 kilograms. Equipped with special-purpose quantitive stainless steel material storehouse with volume of 1m3 which can shared by 4 filling machinery, attached a small air blower for adding material.

Product Description

Ration filling machine for foam particle
1 Performance specification
1.1 This equipment is a small machinery with air blower of frequency conversion to quantitatively fill cloth products with plastic foam particles
1.2 Electric motor 1. 1KW, practical 0. 5KW. Single-phase voltage is 200-240 volts, 50-60 Hz.No matter the small shop, large factory, domestic or abroad, can install and use. Needn't to equip air compressor in addition, so can save electricity and energy, without noise, vibration and danger from the pressure container.
1.3 Each machinery only has one filling mouth. Filling speed is high, each pillow only takes 3-6 seconds. Controlled by pedal switch, shut down automatically when reach the setting weight.
1.4 Little seal size, filling pipe's diameter 32mm. According to user's request, the diameter of filling pipe can be 8-73mm so as to be suitable for different products form, for example, cotton flannel toy, cushion and pillow, etc.
1.5 Can also fill quantitively small particle products, such as silkworm sand and buckwheat, etc.
1.6 Can also fill inquantitively fluffy products such as eiderdown and chemical fibre, etc...The wind force can be set up at will. While filling bed clothes, select lower wind-force, thus the products are soft, the appearance is leveled, easy to fill, and low cost in electricity and energy; While filling pillow, select high wind force, thus the products are tight, difficult to stop up.
1.7 Researched and developed alone by ourselves, first-class level in world, China's patent protection.
1.8 Small size, light weight. Length*Width*High =0.5*0.5*1.0, weight 50 kilograms. Equipped with special-purpose quantitive stainless steel material storehouse with volume of 1m3 which can shared by 4 filling machinery, attached a small air blower for adding material.