Basic Info.
Standard:ISO
Additional Info.
GA728 series rapier loom
Main Structures and Technical Parameters
1, Reed width: 1400mm, 1650mm.
2, Beating-up: Crankshaft weft beating.
3, Weft insertion: Double-rapier weft insertion.
4, Overlocking: Independent hook needle overlocking mechanism.
5, Weft feeding: Tension compensating mechanism.
6, Let-off: Four rubber-covered rollers are tightly grasped with steel roller; Positive speed-adjusting continuous let-off.
7, Shedding: Single dobby mechanism, conjugate cam positive driving, dobby shedding is controlled by pattern paper and peg, 16 heald frames.
8, Take-up: Ratchet type pin-roller intermittent take-up.
9, Warp supplying: Creel-type continuous warp supplying without yarn tail.
10, Driving: The driving system consists of motor, band pulley and gear, etc. Main drive motor: 4KW, 960rpm (Model 140); 5.5KW, 960rpm (Model 165).
11, Loom speed: 15-80rpm (frequency stepless regulating speed).
12, The electric part has the fuction of starting, DOT motion, rapid stopping, etc.
13, Overall dimension (not including creel) (length, width, height) (mm):
4500, 3860, 2400 ( Model 140); 4950, 4760, 2600 ( Model 165).
14, Weight: About 5T.
Product Description
GA728 series rapier loom
Main Structures and Technical Parameters
1, Reed width: 1400mm, 1650mm.
2, Beating-up: Crankshaft weft beating.
3, Weft insertion: Double-rapier weft insertion.
4, Overlocking: Independent hook needle overlocking mechanism.
5, Weft feeding: Tension compensating mechanism.
6, Let-off: Four rubber-covered rollers are tightly grasped with steel roller; Positive speed-adjusting continuous let-off.
7, Shedding: Single dobby mechanism, conjugate cam positive driving, dobby shedding is controlled by pattern paper and peg, 16 heald frames.
8, Take-up: Ratchet type pin-roller intermittent take-up.
9, Warp supplying: Creel-type continuous warp supplying without yarn tail.
10, Driving: The driving system consists of motor, band pulley and gear, etc. Main drive motor: 4KW, 960rpm (Model 140); 5.5KW, 960rpm (Model 165).
11, Loom speed: 15-80rpm (frequency stepless regulating speed).
12, The electric part has the fuction of starting, DOT motion, rapid stopping, etc.
13, Overall dimension (not including creel) (length, width, height) (mm):
4500, 3860, 2400 ( Model 140); 4950, 4760, 2600 ( Model 165).
14, Weight: About 5T.