Basic Info.
HS Code:84479020
Additional Info.
Main Features:
01. 10 inch color LCD display(Dahao BECS-216)
02. Ternary 0.1-12.4mm, binary 0.1-12.7mm Needle range.
03. Fastly identify thread broken head, improving the productivity position board.
04. Transfer sequins and sequins cutting much more perfect automatically.
05. High speed change color, start up and cut thread automatically.
06. Automatic color changing, Upper / Under thread trimming and holding device, automatic thread breakage check
07. Built-in 3.5"floppy disc driver and USB port, compatible with designs of TAJIMA, BARUDAN, ZSK, binary system, ternary system, etc.
08. Editing designs by ways of copying, altering, separating combining, deleting, insert, etc.
09. Auto Design Recovery.
10. Emergency power switch.
11. Power Failure Protection Measures machine has function of being automatically protected and automatically recovered after power off. And after power failure recovering you can continue your embroidery on the machine, without any going out of original form.
12. Auto return to the stop/original point.
13. Manual frame moving.
14. Auto repeat of embroidering.
15. With newest aluminum frame.
16. Free from vibration.
17. With advanced Noise Reduction System, reduce the noise to the lowest level, besides noise reduction mechanisms used in the whole machine.
18. Automatically stops, auto trimming and color changing, after that, the machine automatically starts and run continuously.
19. Higher precision.
Key Technical Parameter:
1. Embroidery speed: 250-1000 R. P. M
2. Shaft servo motor: 1500W
3. Power Supply: Three-phase380V (50 HZ/60HZ) or; Single-phase (50HZ/60HZ) 220V
4. Power consumption: 2.0kw
Product Description
Main Features:
01. 10 inch color LCD display(Dahao BECS-216)
02. Ternary 0.1-12.4mm, binary 0.1-12.7mm Needle range.
03. Fastly identify thread broken head, improving the productivity position board.
04. Transfer sequins and sequins cutting much more perfect automatically.
05. High speed change color, start up and cut thread automatically.
06. Automatic color changing, Upper / Under thread trimming and holding device, automatic thread breakage check
07. Built-in 3.5"floppy disc driver and USB port, compatible with designs of TAJIMA, BARUDAN, ZSK, binary system, ternary system, etc.
08. Editing designs by ways of copying, altering, separating combining, deleting, insert, etc.
09. Auto Design Recovery.
10. Emergency power switch.
11. Power Failure Protection Measures machine has function of being automatically protected and automatically recovered after power off. And after power failure recovering you can continue your embroidery on the machine, without any going out of original form.
12. Auto return to the stop/original point.
13. Manual frame moving.
14. Auto repeat of embroidering.
15. With newest aluminum frame.
16. Free from vibration.
17. With advanced Noise Reduction System, reduce the noise to the lowest level, besides noise reduction mechanisms used in the whole machine.
18. Automatically stops, auto trimming and color changing, after that, the machine automatically starts and run continuously.
19. Higher precision.
Key Technical Parameter:
1. Embroidery speed: 250-1000 R. P. M
2. Shaft servo motor: 1500W
3. Power Supply: Three-phase380V (50 HZ/60HZ) or; Single-phase (50HZ/60HZ) 220V
4. Power consumption: 2.0kw