Basic Info.

Additional Info.

Application: This machine is designed to form needle-punched nonwoven into cup like shell for mask (N95) through hot pressing. This machine is necessary equipment for cup mask production.

Specification:
A Electric Source for Machine: 220VAC 30A 1P
B Compressed Air: 7Kg/Sqaremeter
C Preheating Time: 12minute/80centigrade; 23minute/130centigrade
D Applied Temperature of Mould: 130centigrade for nonwoven fabric; 80centigrade for needle-punched nonwoven fabric.

E Production Spending Time: 7.5second for welding, 6.5second for cutting (the two acts happen the same time).
F Dimension of main machine: 1400L*930W*1800H
G Dimension of material frame: 2000L*650W*1300H
H Weight: About 900KG
I Capacity: 40pieces/minute

Features:
A Machine is controlled by PLC, operation is easy;
B Each tool is with a separated material ring, escaping uneven forming due to pulling during hot pressing;
C Products are cut off automatically with electronic scissor, no smoke generated, thus machine is environment-friendly;
D Products gathering system is controlled by optical sensor, and products is overlaid one by one be the machine as the gathering plate move down little by little as the indication from sensor, saving labors and protecting product shape from damage due to pressure.

Product Description

Application: This machine is designed to form needle-punched nonwoven into cup like shell for mask (N95) through hot pressing. This machine is necessary equipment for cup mask production.

Specification:
A Electric Source for Machine: 220VAC 30A 1P
B Compressed Air: 7Kg/Sqaremeter
C Preheating Time: 12minute/80centigrade; 23minute/130centigrade
D Applied Temperature of Mould: 130centigrade for nonwoven fabric; 80centigrade for needle-punched nonwoven fabric.

E Production Spending Time: 7.5second for welding, 6.5second for cutting (the two acts happen the same time).
F Dimension of main machine: 1400L*930W*1800H
G Dimension of material frame: 2000L*650W*1300H
H Weight: About 900KG
I Capacity: 40pieces/minute

Features:
A Machine is controlled by PLC, operation is easy;
B Each tool is with a separated material ring, escaping uneven forming due to pulling during hot pressing;
C Products are cut off automatically with electronic scissor, no smoke generated, thus machine is environment-friendly;
D Products gathering system is controlled by optical sensor, and products is overlaid one by one be the machine as the gathering plate move down little by little as the indication from sensor, saving labors and protecting product shape from damage due to pressure.