Trang chủ » Các loại thiết bị dệt may » Other products

Warping Machine (Zzy 400/Ap)

Basic Info.


Additional Info.

Optimally and flexibly used in the warping of various kinds of nylon, Faber, cotton yarn and etc.
Diameter of the application beam is below 400mm, diameter of inside hole is 17mm or 20mm, inside length is 255mm.

Speed Adjustment:
Frequency control: 0~350r/min. (Line Speed 0~390m/min)
Set Lenght: Used the counter to set any warp lenght according to the requirement, this measure can reduce the loss of warp.
Width and Density Adjustment: Adopt4 pieces of W-reed; Adjusst width and the left and right device randoly.
Motor: 2HP/4P/380V3Phase.

C th? b?n quan tm

Product Description

Optimally and flexibly used in the warping of various kinds of nylon, Faber, cotton yarn and etc.
Diameter of the application beam is below 400mm, diameter of inside hole is 17mm or 20mm, inside length is 255mm.

Speed Adjustment:
Frequency control: 0~350r/min. (Line Speed 0~390m/min)
Set Lenght: Used the counter to set any warp lenght according to the requirement, this measure can reduce the loss of warp.
Width and Density Adjustment: Adopt4 pieces of W-reed; Adjusst width and the left and right device randoly.
Motor: 2HP/4P/380V3Phase.

Sản phẩm cùng loại :